Frames Pipeline Plan

File Format: FTCL parameter file

Name: fpPlan.par

Produced by: framesPre

Used by: frames

Size: < 10 Kb

Archived? Yes

Description

Processing plan to control the frames pipeline. Each plan targets the data from one column in the Imaging Array for one imaging run.

Contents

rerun		    XXX                 # Rerun number (optional, used by
					# OPDB only)

parameters          'XXX'               # Tunable parameters file (if any)
parametersDir 	    'XXX'               # Directory containing the 'parameters'
                                        # file

run                 XXX                 # Imaging run number. 
camCol              XXX                 # Column in the imaging camera. 
startField          XXX                 # Start pipeline with this field. 
endField            XXX                 # End pipeline with this field  
                                        # (inclusive). 

# Processing Parameters
diagnostics         1                   # if > 0, do create a file with
                                        #   diagnostic output from each field
diagFile            fpDiag              # prefix of the file into which 
                                        #   diagnostic output will be placed.
                                        #   Name includes run, camCol. Ex:
                                        #       scDiag-0000505-1.par
                                        # NB: this parameter must exist, even
                                        #   if "diagnostics" is set to 0!!!


filterlist          u g r i z           # filters to include when processing
ccdrow_r            1
ccdrow_i            2
ccdrow_u            3
ccdrow_z            4
ccdrow_g            5
ccdrow_o            6
ccdrow_l            7
ccdrow_t            8
ccdrow_s            9

# the raw images may be found in subdirectories here
imageDir 	    'XXX'

# known objects directory and file names
koDir               'XXX'
koBrightStars       'XXX'
koBrightGalaxies    'XXX'

#output dir for ps pipeline
psDir               'XXX'

#trans files
transFileDir        'XXX'
transFile           'XXX'

# directory for col bias frames, named idB-000581-rc.fit
biasDir             'XXX'

# CCD configuration files
configDir           'XXX'		# directory for ccd calibration files
ccdConfig           'XXX'               # amplifier configuration
ccdECalib           'XXX'               # electronic calibrations
ccdBC               'XXX'               # bad pixels

# put the output (corrected images, atlas images, OBJC catalogs, logs) here:
outputDir 	    'XXX'

# The remaining parameters are all optional
verbose             1                   # verbose > 0 means print a lot
display             0                   # display > 0 means show various
                                        #   images as the pipeline progresses,
                                        #   waiting for user input after 
                                        #   displaying each one
time_limit   0				# Max number of seconds per field;
					# 0 means unlimited

write_test_info	      1			# if 1 write the TEST_INFO output files
verbose               0                 # verbose > 0 means print a lot
write_fpC_files	      1			# should I write fpC files?
display	              0  		# |display| > 0 means show various
                                        #  images as the pipeline progresses,
                                        #  waiting for user input after 
                                        #  displaying each one if display > 0
					#  If |display| > 10, use a large image
# The other display_* params only apply if $display is true
display_filterlist	all		# names of filters to display
display_zoom	1			# how much to zoom after displaying
display_row 	-1			# where to zoom about
display_col	-1
#
display_raw		0		# display raw and corrected frames
display_smooth 		0		# show frame after smoothing with PSF
display_subtracted	0		# show image after star subtraction
display_binned 		0		# show binned objects as they are found

display_objs		0		# display objects as they are measured
					# if > 1, show IDs too
display_isoEllipse	0		# show isophotal fit
display_peaks		0		# show all peaks within objects
display_petroRad	0		# show object's Petrosian radius

display_summary		0		# display summary graphs at end of run
#
# Optional truth table stuff
#
truth_file		/dev/null
truth_format		%*g %*s %g %*g %*g %*s %g %g %g %*s
truth_cols 		2 3 1 4
truth_dist		2