Name: fpPlan.par
Produced by: framesPre
Used by: frames
Size: < 10 Kb
Archived? Yes
rerun XXX # Rerun number (optional, used by
# OPDB only)
parameters 'XXX' # Tunable parameters file (if any)
parametersDir 'XXX' # Directory containing the 'parameters'
# file
run XXX # Imaging run number.
camCol XXX # Column in the imaging camera.
startField XXX # Start pipeline with this field.
endField XXX # End pipeline with this field
# (inclusive).
# Processing Parameters
diagnostics 1 # if > 0, do create a file with
# diagnostic output from each field
diagFile fpDiag # prefix of the file into which
# diagnostic output will be placed.
# Name includes run, camCol. Ex:
# scDiag-0000505-1.par
# NB: this parameter must exist, even
# if "diagnostics" is set to 0!!!
filterlist u g r i z # filters to include when processing
ccdrow_r 1
ccdrow_i 2
ccdrow_u 3
ccdrow_z 4
ccdrow_g 5
ccdrow_o 6
ccdrow_l 7
ccdrow_t 8
ccdrow_s 9
# the raw images may be found in subdirectories here
imageDir 'XXX'
# known objects directory and file names
koDir 'XXX'
koBrightStars 'XXX'
koBrightGalaxies 'XXX'
#output dir for ps pipeline
psDir 'XXX'
#trans files
transFileDir 'XXX'
transFile 'XXX'
# directory for col bias frames, named idB-000581-rc.fit
biasDir 'XXX'
# CCD configuration files
configDir 'XXX' # directory for ccd calibration files
ccdConfig 'XXX' # amplifier configuration
ccdECalib 'XXX' # electronic calibrations
ccdBC 'XXX' # bad pixels
# put the output (corrected images, atlas images, OBJC catalogs, logs) here:
outputDir 'XXX'
# The remaining parameters are all optional
verbose 1 # verbose > 0 means print a lot
display 0 # display > 0 means show various
# images as the pipeline progresses,
# waiting for user input after
# displaying each one
time_limit 0 # Max number of seconds per field;
# 0 means unlimited
write_test_info 1 # if 1 write the TEST_INFO output files
verbose 0 # verbose > 0 means print a lot
write_fpC_files 1 # should I write fpC files?
display 0 # |display| > 0 means show various
# images as the pipeline progresses,
# waiting for user input after
# displaying each one if display > 0
# If |display| > 10, use a large image
# The other display_* params only apply if $display is true
display_filterlist all # names of filters to display
display_zoom 1 # how much to zoom after displaying
display_row -1 # where to zoom about
display_col -1
#
display_raw 0 # display raw and corrected frames
display_smooth 0 # show frame after smoothing with PSF
display_subtracted 0 # show image after star subtraction
display_binned 0 # show binned objects as they are found
display_objs 0 # display objects as they are measured
# if > 1, show IDs too
display_isoEllipse 0 # show isophotal fit
display_peaks 0 # show all peaks within objects
display_petroRad 0 # show object's Petrosian radius
display_summary 0 # display summary graphs at end of run
#
# Optional truth table stuff
#
truth_file /dev/null
truth_format %*g %*s %g %*g %*g %*s %g %g %g %*s
truth_cols 2 3 1 4
truth_dist 2