Name: psPlan.par
Produced by: psPre
Used by: ps
Size: < 10 Kb
Archived? Yes
parameters 'XXX' # Tunable parameters file (if any)
parametersDir 'XXX' # Directory containing the 'parameters'
# file
run XXX # Imaging run number.
camCol XXX # Column in the imaging camera.
startField XXX # Start pipeline with this field.
endField XXX # Stop pipeline with this field
# (inclusive).
startRun XXX # First field in the observing run
endRun XXX # Last field in the observing run
# Processing Parameters
diagnostics 1 # if > 0, do create a file with
# diagnostic output from each field
diagFile psDiag # prefix of the file into which
# diagnostic output will be placed.
# Name includes run, camCol. Ex:
# psDiag-0000505-1.par
# NB: this parameter must exist, even
# if "diagnostics" is set to 0!!!
filterlist u g r i z # filters to include when processing
nfilters 5 # number of filters with data in fang
stampsize 45 # size on a side of postage stamps
refcolor r
ccdrow_r 1
ccdrow_i 2
ccdrow_u 3
ccdrow_z 4
ccdrow_g 5
ccdrow_o 6
ccdrow_l 7
ccdrow_t 8
ccdrow_s 9
# default calibration is here (last good output from psp)
ctFileDir 'XXX'
ctFile 'XXX'
# the fangs, output of SSC line may be found here
fangDir 'XXX'
# astrometric trans's for this run
transFileDir 'XXX'
transFile 'XXX'
# monitor telescope photoms
photomFileDir 'XXX'
photomFile 'XXX'
# monitor telescope secondary patches are here
mtPatchFormat kaCalObj-%08d.fit
mtPatches {seq directory} {seq directory} ...
# directory for col bias frames, named idB-000581-rc.fit
biasDir 'XXX'
# CCD configuration files
configDir 'XXX' # directory for ccd calibration files
ccdConfig 'XXX' # amplifier configuration
ccdECalib 'XXX' # electronic calibrations
ccdBC 'XXX' # bad pixels
# put the corrected FANGs here
outputFangDir 'XXX'
# put other output (corrected images, atlas images, OBJC catalogs, logs) here:
outputDir 'XXX'
# the remaining parameters are all optional
verbose 1 # verbose > 0 means print a lot
# (optional)
display 0 # display > 0 means show various
# images as the pipeline progresses,
# waiting for user input after
# displaying each one
# (optional)
# the following flags control saoimage display (optional)
display_raw 0 # show the raw PSF stamps
display_psf 0 # show the corrected PSF stamps (2 for rejects)
display_PSFstars 0 # show good and clipped PSF stars
display_average_psf 0 # display the average of PS stars
display_wing 0 # display corrected wing stamps
display_symmetry 0 # display residual after subtracting symmetric image
display_flat 0 # display flatfield (>1 for the smoothed flat-field vector)
# the following flags control pgplot display (optional)
display_bias 0 # plot bias
display_clipping 0 # plots of (sigma1,sigma2) and (Q,U) for good stars
# for >1 produces hard copies in outdir
# (psPlotsQU*.ps)
display_rejection 0 # display rejection statistics for all frames
# for >1 produces hard copies in outdir
# (psPlotsRejecStats*.ps)
display_profiles 0 # display stars' CELL_PROFs
# for >1 produces hard copies in outdir
# (psPlotsCellProf*.ps)
display_summary 0 # graphs at the end (also written to psPlots*.ps)